No products in the cart.
Signal Boosters, DJI Inspire 2
RAPTOR SR for DJI Inspire 1
- Runs at 2.4GHz & 5GHz
- The drone is not modified
- Provides a reliable and stable connection between the drone and the remote control
- Complete and reliable solution
Availability:
In Stock
153.00 € 127.50 € ex. Tax
In Stock
RAPTOR SR for DJI Inspire 1
Dji Inspire 1 is a high quality drone. The basic set allows up to 30 minutes of continuous flight, maximum speed of 60 km / h. The drone is designed for professional film directors.
The 4Hawks antenna for the Dji Inspire 1 model operates at 2.4GHz with 9dBi gain with an additional antenna installed inside the controller, operating at 5GHz frequency, which allows the drone to work with 2 controllers.
The whole construction is 100% UV protected to ensure the durability of the equipment. Additionally, part of the structure is made of aluminum to make the whole structure as light as possible. The mounting is made of stainless steel for rock stability.
Installing the range extender is easy and does not require professional help. The whole set is light and even (without any loose parts of the equipment). Changing the direction of the antenna should not be a problem, as the system is designed in a way that allows a quick change of position with just one “click” to 5 different positions. This way you can be sure that you will not lose touch with your drone.
The 4Hawks antenna for the Dji Inspire 1 model operates at 2.4GHz with 9dBi gain with an additional antenna installed inside the controller, operating at 5GHz frequency, which allows the drone to work with 2 controllers.
The whole construction is 100% UV protected to ensure the durability of the equipment. Additionally, part of the structure is made of aluminum to make the whole structure as light as possible. The mounting is made of stainless steel for rock stability.
Installing the range extender is easy and does not require professional help. The whole set is light and even (without any loose parts of the equipment). Changing the direction of the antenna should not be a problem, as the system is designed in a way that allows a quick change of position with just one “click” to 5 different positions. This way you can be sure that you will not lose touch with your drone.
Significantly improve the reach in urban areas as well
Raptor range extenders are designed to increase the flight range of your drone, making it even more enjoyable than ever. All this with crystal clear video and a very long range, which is limited only by your battery.
Break the restrictions
The directional antenna allows continuous drone flight without any interference or noise from other devices or networks.
EXCEPTIONAL ANTENNA BEAM PERFORMANCE
Compared to the original omnidirectional antennas with low distance efficiency, the 4Hawks Raptor antenna expands the sector coverage, increasing the maximum flight range.
Standard antenna
4Hawks antenna
OPTIMIZED WAVE DISTRIBUTION
The signal is improved thanks to the efficient propagation of the waves aimed at the drone.
Standard antenna
Video
00:00
00:03
4Hawks antenna
Video
00:00
00:01
ALL ACCESSORIES INCLUDED
The entire set is comprised of antenna, dedicated mounting system, pigtails and other required tools to modify your controller.
ADJUSTABLE ANTENNA TILT
Through the mounting system it can perfectly adjust the lifting angle, as well as direct the antenna exactly to the current position of the drone.
Installation
If you think that you will not be able to do it yourself, we from iDrones.shop can install it
| brands |
|---|
Electrical parameters
Frequencies
Port 1: 2.40 – 2.50 GHz
Port 2: 2.40 – 2.50 GHz
Port 2: 2.40 – 2.50 GHz
Gain
Port 1: 9 dBi (+/- 1 dBi)
Port 2: 9 dBi (+/- 1 dBi)
Port 2: 9 dBi (+/- 1 dBi)
VSWR
Port 1: <1.50 (max. <2.30)
Port 2: <1.50 (max. <2.30)
Port 2: <1.50 (max. <2.30)
Beamwidth
Port 1: 70 ° / 65 °
Port 2: 70 ° / 65 °
Port 2: 70 ° / 65 °
Polarization
Port 1: Vertical
Port 2: Vertical
Port 2: Vertical
Impedance
Port 1:50 Ω
Port 2:50 Ω
Port 2:50 Ω
Mechanical parameters
Material
Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB
Mounting: Stainless steel + paint
Mounting: Stainless steel + paint
Weight
~ 200g (110g Antenna + 90g Mounting)
Dimensions
16.1 x 9.1 x 1.7 cm
6.34 x 3.60 x 0.67 inch
6.34 x 3.60 x 0.67 inch
Connection
Port 1: RP-SMA female
Port 2: RP-SMA female
Port 2: RP-SMA female
Tilt adjustment
5 tilt positions, OnClick system
Mounting type
QuickAttach
There are no reviews yet.