Flight controller Beast F7 45A AIO (MPU6000) 25.5 × 25.5

What if you could get the combined speed of MCU and ESC power on a large stack, but carefully arranged on a 25 × 25 board? That would be crazy, wouldn’t it? Well, we just did it…

These are our new iFlight BEAST AIO FC series for your best build. Future all-in-one FC proof to enhance the game and make more room for future firmware development for flights such as Betaflight, Emuflight and more. Lightweight, minimal size, minimal work. QFP (large size) MCU and ultra powerful Mosfets for almost any compilation. Solder your motor wires and go! DJI Plug & Play plug and so many UART, most people wouldn’t even use them all. Compatible with digital and analog FPV, on-board barometer for possible long-distance flights and much more. Free the beast!

Safety reminder:

The DJI plug & play port does not have a voltage regulator (BEC) and passes through VBAT. Caddx Vista reaches 26.4V (6S), DJI Air Unit reaches 17.6V (4S). Make sure you don’t turn on the DJI Air Unit directly when flying the 6S, as this will fry it!

Small 4S motors usually need an additional capacitor of at least 16V / 220uF, for 6S to 35V or even 50V. Larger motors have greater current drawdown, higher voltage spikes and more serious rear EMF (engine brake, works as a generator). Make sure you add large enough or even larger low ESR capacitors on the AIO battery pad or on your battery to drive the more aggressive engines you fly. There is a choice of capacitors in the package, but it is never a bad idea to take care to protect your board. Smaller boards have a smaller capacity that needs to be covered with external capacitors, there is no way around.