Dark Light

Nazgul5 Analog V2 4S 6S FPV Drone – BNF

iFlight

🟢 5mm arm design for more durability

🟢 Easy-Swap arms

🟢 LED illuminated Logo

🟢 XING-E 2207 motors and NAZGUL 5140 props

🟢 5″ version also fits 5.1″ style propellers

🟢 Popular True-X configuration

🟢 TPU crash-guards

🟢 Fits both 30.5x and 20x stacks

Availability:

In Stock

330.00 

275.00  ex. Tax

By purchasing this product, you will win 330 points!

Nazgul5 Analog V2 4S 6S FPV Drone – BNF

Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

 

Changelog:

May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.

June,2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.

 

Additional Suggested Parts

  • Battery 4S 1550mAh
  • Battery 6S 1300mAh

 

Important:

  • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
  • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.

 

SKU: DR97553-1-1 Category: Tags: ,
brands

Power version

4S, 6S

XL5 V5 frame specs:

  • SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
  • SucceX-E F7 V2.1 Flight Controller
  • XING-E 2207 FPV Motor (6S 1800KV / 4S 2750KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

FC // SucceX-E F7 Flight controller

  • MCU: STM32F22RET6 216MHz
  • Gyro: MPU6000
  • Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
  • OSD: IFLIGHT OSD (AT7456E)
  • BEC: 5V 2.5A
  • BlackBox: 16MB
  • Uart: 4*UART(UART1、UART2、UART4、UART5)
  • UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
  • UART2 for Receiver
  • UART4 for Free
  • UART5 for ESC Telemetry
  • 4×Dshot/PWM outputs
  • Smartaudio & IRC Tramp VTX protocol supported
  • WS2812 led Strip: Yes
  • Bepper: Yes
  • Firmware: IFLIGHT_SUCCEX_E_F7
  • Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
  • Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Dimension: 36*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 15g (without wire)
  • Supports 2-6S Lipo input
  • EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Constant: 45A / Burst: 50A
  • Supports: DShot150/300/600/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • The output power is stable;
  • Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • Output 48 frequency points,
  • Frequency lock fast, the boot does not interfere with companions;
  • Built-in output power self-check function;
  • Full format video format: NTSC /PAL;
  • Wide input voltage range. low power consumption:
  • 7V~36V,+12V/[email protected];
  • Small size:36*36*3mm
  • Mounting holes 4-M3
  • Lightweight: 7.2g(excluding antenna)

Specs:

  • Prebuilt and tested Quadcopter
  • 1x Nazgul5(XL5 V5) Frame
  • 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Nazgul5 Analog V2 4S 6S FPV Drone – BNF”

There are no reviews yet.