Dark Light

Chimera7 6S FPV Long Range Analog – BNF

– 6mm rigid arm design for more stiffness

– Top- and bottom battery mount option

– XING 2806.5 efficient wide stator motors

– GPS pre-installed for more safety at a distance

– 800mW high power adjustable VTX

– GoPro TPU bottom stand (GoPro protector not included)

– 360° TPU protection, FPV cam protection, and antenna mounts

– Battery voltage LED status light (illuminated IF logo on the bottom)


Coming Soon

439.00  365.83  ex. Tax

Coming Soon

Chimera7 6S FPV Long Range Analog – BNF

Introducing what has been requested for too long already! A super efficient iFlight 7inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above.

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts are included to cover you and your antenna dead-ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).


VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.



June 2021: Caddx Ratel, 2.1mm lens camera changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19


Additional Suggested Parts (not included)

– 1300KV  Cruiser, suggested battery: 6S 4000mAh

– 1800KV Speed Cruiser, suggested battery: 6S 2600mAh


BNF // Parts list (Build)

Prebuilt and indoor tested Quadcopter

– 1x Chimera7 frame

– 1x GoPro TPU bottom stand incl. lock screw

– 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19

– 1x Albatross RHCP SMA 5.8GHz 150mm antenna

– 2 sets x Gemfan tri-blade 7040 props (Set of 4 – Color may vary)

– 4x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

SKU: DR105912 Category: Tags: ,

1300KV Cruiser, 1800KV Speed Cruiser


No Additional receiver, TBS Crossfire NANO RX

FRAME //: Chimera7

– Wheelbase: 320mm

– Main body dimension: 258*199mm

– Bottom to top distance: 20mm

– Arm thickness: 6mm

– Bottom plate thickness: 3mm

– Top plate thickness: 2mm

– Upper(middle) plate thickness: 3mm

– Camera plate thickness: 3mm (included TPU inserts)

ELECTRONICS // SucceX-D F7 V2.2 Stack (50A 4-in-1 ESC):

SucceX-D F7 V2.2 TwinG

  • MCU: STM32 F722
  • Gyro:MPU6000
  • Baro: DPS310 (Barometer can only be used with Betaflight 4.3.0 and above)
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale:  100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 8S
  • Firmware target: IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions:   36*36mm
  • Weight: 8.1g
  • USB type-C

ESC // SucceX 50A

  • MCU: STM32G071
  • Up to 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 50A / Burst: 60A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot600, Proshot, Oneshot, Multishot
  • Target: iFlight_G071_4in1
  • Weight: 14.3g
  • Mounting pattern: 30.5*30.5mm/Φ3mm
  • Dimensions: 43*39mm (including the power pads)

VTX// SucceX Force 5.8GHz 800mW VTX Adjustable

– Item: SucceX-Force 800mW adjustable VTX

– Input voltage: 7-36V

– Output voltage/ Max current: 5V 1A

– 12V input current: [email protected] MODE, [email protected], [email protected][email protected], [email protected]

– Channel: 40

– size:36*36*3mm

– PIT/25mW/100mW/400mW/800mW

Based on 0 reviews

0.0 overall

Be the first to review “Chimera7 6S FPV Long Range Analog – BNF”

There are no reviews yet.