Dark Light

Chimera7 Pro 6S FPV Long Range Analog – BNF


🟢 Battery voltage LED status light (illuminated IF logo on the bottom)

🟢 GoPro TPU bottom stand (GoPro protector not included)

🟢 Lightweight Side Panels Design – Keep Your Rig Clean

🟢 XING2 2809 1250KV efficient wide stator motors

🟢 GPS pre-installed for more safety at a distance

🟢 360° TPU protection, FPV cam protection

🟢 6mm rigid arm design for more stiffness

🟢 Top- and bottom battery mount option


On Pre-order

Call for Price

0.00  ex. Tax

Chimera7 Pro 6S FPV Long Range Analog – BNF

Introducing what has been requested for too long already! A super-efficient iFlight 7inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above.

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts are included to cover you and your antenna dead-ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).

Main Changelog from Chimera7 to Chimera7 Pro:

  • SucceX-D F7 V2.2 Stack (F7+50A ESC) upgraded to BLITZ F722 Stack (F7 V1.1 + 55A 4in1 ESC)
  • New Lightweight Side Panels Design – Keep Your Rig Clean
  • XING 2806.5 upgraded to XING2 2809 1250KV
  • 7-inch frame upgraded to 7.5inch


SKU: L012203 Category:


ExpressLRS ELRS, Frsky R81 (ACCST D8), TBS Crossfire NANO RX, Without Receiver

  • Weight: 695g (without battery and GoPro mount)
  • Total Dimensions: 258*200mm (body dimension)
  • Upper(middle) Plate Thickness: 3mm
  • Bottom to Top Distance: 20-29mm
  • ESC: BLITZ E55 4-IN-1 2-6S ESC
  • Bottom Plate Thickness: 3mm
  • Camera Plate Thickness: 3mm
  • Top Plate Thickness: 3mm
  • Geometry:  DC (DeadCat)
  • HQ 7.5X3.7X3 Propellers
  • Arm Thickness: 6mm
  • XING2 2809 1250KV
  • FC: BLITZ F722

ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 55A 4in1 ESC):

FC // BLITZ F722 Flight Controller

  • Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
  • Smartaudio / IRC Tramp VTX protocol supported
  • Firmware target: IFLIGHT_BLITZ_F722
  • Motor outputs: 4x (SH1.0 connector)
  • Flash: 32MB (Blackbox flash)
  • I2C serial: SDA / SLA pads
  • Dimensions: 36.5*35 mm
  • Barometer: DPS310
  • OSD Chip: AT7456E
  • LED controller: Yes
  • MCU: STM32 F722
  • Beeper pad: Yes
  • Gyro: BMI270
  • Weight: 7.8g
  • UARTS: 6

ESC // BLITZ E55 4-IN-1 2-6S 55A ESC

  • Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
  • Mounting Holes: 30.5*30.5mm/Φ4mm
  • Target:   IFLIGHT_BLITZ_G2
  • Supports 2-6S Lipo input
  • Current sensor: Yes
  • Constant: 55 Amps
  • Current rate: 200
  • Burst: 65 Amps
  • Weight: 15.3g
  • MCU: G071
  • BEC: No

VTX// BLITZ 1.6W VTX Adjustable

  • Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
  • IRC Tramp VTX table values: 25mW/400mW/800mW/1600mW
  • Power levels: PIT/25mW/400mW/800mW/1600mW
  • All our VTX tables can also be found here:
  • Lightweight: 18.9g (excluding antenna)
  • Mounting pattern: 30.5×30.5mm/Φ3
  • Channels: 40 (including Raceband)
  • VTX telemetry: IRC Tramp
  • Input voltage: 7V~36V
  • Interface: MMCX

Chimera7 Pro Analog BNF Included Components and Parts

  • 4 x HQ 7.5X3.7X3 CW propeller + 4 x  HQ 7.5X3.7X3 CCW (Color may vary)
  • 1 x RaceCam R1 Mini 1200TVL 2.1mm 19*19 camera
  • 1 x Albatross RHCP 5.8GHz SMA FPV Antenna
  • 2 x iFlight Lipo Strap 20*250mm (Black)
  • 1 x Pre-built and Tested Chimera7 Pro

Based on 0 reviews

0.0 overall

Be the first to review “Chimera7 Pro 6S FPV Long Range Analog – BNF”

There are no reviews yet.