FPV Drone Parts / Accessories Categories
-
3D Printed Parts (3)
-
Batteries (69)
-
Cables / Connectors (87)
-
Cases / Backpacks (11)
-
Chargers (45)
-
Digital FPV Systems (11)
-
Flight Controllers (15)
-
FPV Antennas (10)
-
FPV Cameras (29)
-
Frames (53)
-
Hardware and Tools (27)
-
Motors (35)
-
Other FPV Accessories (32)
-
Propellers (34)
-
Radio Controllers (26)
-
Radio Receivers (16)
-
Speed Controllers (ESC) (21)
-
Stacks / AIO (27)
-
Video Transmitters (VTX) (14)
- You cannot add "Battery Tattu 4500mAh 22.2V 25C 6S1P XT90" to the cart because the product is out of stock.
FPV Drone Parts / Accessories
Showing 1–35 of 552 results
- Hardware and Tools
Electric Screwdriver Set Hoto QWLSD010, 25 in 1
On Pre-order
🟢 Weight – approx. 314 g
🟢 Case dimensions – Approx. 182 x 71.3 x 26.1 mm
🟢 Screwdriver dimension – sapprox. 159 x 17 mm
🟢 Battery type – Li-Ion
🟢 Battery capacity – 350 mAh
🟢 Input current5 V – 0.14 A
🟢 Nominal voltage3,7 V
🟢 Charging time -approx. 160-200 min
🟢 Bit model – C4 x 28 mm
🟢 Bit material – S2 steel
SKU: QWLSD010 - Hardware and Tools
Precision Screwdriver Set Hoto QWLSD009, 28 in 1
On Pre-order
🟢 Weight – Approximately 230 g
🟢 Case dimensions – 149.5 x 78 x 19.5 mm
🟢 Screwdriver dimensions – 126.5 x 10.1 x 10.1 mm
🟢 Max. torque2 N⋅m
🟢 Material (bits) – Steel S2
🟢 Available bits -C4 x L28 mm
🟢 National Standard – GB/T 10635-2013
SKU: QWLSD009 - Hardware and Tools
Precision Screwdriver Set JIMI Home JM-GNT30, 30pcs
On Pre-order
🟢 Handle material Aluminium alloy
🟢 Bits material Steel alloy S2
🟢 Case material ABS
🟢 Tweezer material Stainless steel
🟢 Handle dimensions 115 x 10.8 mm
🟢 Bit dimensions 45 x 4 mm
🟢 Case dimensions 166 x 77 x 26 mm
🟢 Tweezer dimensions 122 x 10 mm
🟢 Total weight 417 g
SKU: JM-GNT30 - Hardware and Tools
Precision Screwdriver Set JIMI Home JM-GNT80, 80pcs
On Pre-order
🟢 Adjustable handle material – Aluminum alloy / plastic
🟢 Small handle material – aluminum alloy
🟢 Tip material – Steel alloy S2 (Reverse cross, H2.5, H2.3 and H2.0 – CRV)
🟢 Case material – ABS
🟢 Tweezers material – stainless steel
🟢 Handle dimensions – 80 x 23 x 20mm
🟢 Tip dimensions – 45mm
🟢 Case dimensions – 214 x 92 x 35mm
🟢 Total weight – 802 g
SKU: JM-GNT80 - Hardware and Tools
Electric Screwdriver Set Hoto QWLSD011, 25 in 1
In Stock
🟢 Weight – approx. 651,40 g
🟢 Dimensions – 46.2 x 120.2 x 211 mm
🟢 Max. torque (electric) – 4 N⋅m
🟢 Max. torque (manual) – 8 N⋅m
🟢 Rechargeable battery – Lithium-ion
🟢 Rechargeable battery capacity – 1500 mAh
🟢 Rated voltage – 3.6V / 6A (max.)
🟢 Charging time – approx. 150 min
SKU: QWLSD011 - Frames
Chimera7 Pro 6S FPV Long Range Analog – BNF
On Pre-order
🟢 Battery voltage LED status light (illuminated IF logo on the bottom)
🟢 GoPro TPU bottom stand (GoPro protector not included)
🟢 Lightweight Side Panels Design – Keep Your Rig Clean
🟢 XING2 2809 1250KV efficient wide stator motors
🟢 GPS pre-installed for more safety at a distance
🟢 360° TPU protection, FPV cam protection
🟢 6mm rigid arm design for more stiffness
🟢 Top- and bottom battery mount option
SKU: L012203 - Radio Controllers
DJI FPV Remote Controller
On Pre-order
OverviewWith the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.TipsIt is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.
If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller.SKU: DR83226 - FPV Cameras
DJI Camera for vista\air unit
On Pre-order
OverviewA single-camera module, which has a quick-release design for convenient replacement. The FPV camera does not come with coaxial cables.HighlightsA single-camera modular with a quick-release design, making replacement easier and cost-efficient for users.TipsTo prevent an ESD event, where static electricity can penetrate the circuit, adhere to safety procedures when replacing the camera.SKU: DR83219